DQD Water Flow Cutting Machine - Jinwei

Cut-off machine The DQD water flow cutting machine is a key piece of equipment for producing adhesive short fibers. It has high-cutting quality, compact structure, reasonable operation, long service life, and easy maintenance. Equipment structure: 1. Rack: The rack is made of welded profiles, so the bottommost profile is riveted to the foundation. 2. Tension device: composed of three tension rollers of the same diameter. The filament bundle is wound on three rollers with a length of 1.93m to eliminate tension, allowing the filament bundle to enter the cutting machine inlet vertically in a tension-free state. 3. Transmission device:? Three 4.0kw frequency modulated electric reducers drive the three tension rollers. ? The moving disc is driven by a 5.5kw frequency-modulated electric reducer and controlled by a frequency converter for speed. 4. Lifting device: composed of a box cover, an electric push rod, and a self-locking system. 5. Funnel device: The fiber bundle enters the funnel device vertically and is cut at the inner edge (bottom blade) at the outlet. 6. Cutting device: composed of blade, handle, knife holder, spindle, torsion spring, and turntable. 7. Sharpening device: The grinding ring is made of AL2O3 and special corrosion-resistant materials, and the blade is always attached to the surface of the grinding stone during operation, grinding while cutting the wire. 8. Protective device: composed of a sliding window and an exhaust hood, to timely discharge the exhaust gas during the production process. Technical parameter model DQD300-1300 Type: Single side, divided into left and right sides Dimensions: 1550 * 1490 * 3700mm (length, width, height) Cutting ability: Adhesive fiber 4-13 million denier Spinning speed: 15-100m/min, commonly used spinning speeds are 40, 45, 50, 55, 60m/min Tension roller: ? 300 × (310-335) mm electric machinery: SEW or NORD Cut off the head Diameter of cutterhead (turntable): wire bundle feeding inlet ? 150-165mm (inner diameter) Fiber cutting length 25-120mm, commonly used specification 38mm, 51mm, 60mm Cutting knife 11-1 Fixed blade (bottom blade): The blade body material is 904L, and the cutting edge material is imported wear-resistant alloy Moving knife (blade): The material of the blade body is cobalt chromium tungsten wear-resistant gold imported from Italy Material The acidic water flow component is 904L, and the rest of the components are 316L Equipment weight?around 2000.00kgs